Anbooc 5000mAh Rechargeable Hand Warmer User Manual
Click here to download this user manual, which includes a German version.
Thank you for purchasing the Anbooc Rechargeable Hand Warmer. The product function not only as a hand warmer but a power bank. The palm design makes the hand warmer easier to fit into your pocket, and the adjustable warmth helps relieve menstruation, Reynolds disease, joint pain, skin cracking and frostbite. It is also the perfect gift for people who love outdoor sports such as hunting, climbing, hiking, traveling, camping, skiing, cycling, etc. READ ALL WARNINGS AND INSTRUCTIONS before using your Hand Warmer for the first time.
* Be cautious of low temperature burn.
* Do not allow children to use this product without proper adult supervision.
INCLUDE IN THE BOX ARE:
1 - Hand Warmer
1 - Charging Cable
1 - User manual
1 - Flannelette bag
PART IDENTIFICATION
1. USB C port
2. On/off button
3. Blue/red LED status indicators
- Red lights indicate hand warmer mode is on.
- 1 solid Red light indicates the low heating level, 2 indicate medium and 3 indicate high.
- Blue lights blinking indicate the Hand Warmer is under charged.
- 3 solid Blue lights indicate the charge is complete.
CHARGING THE HAND WARMER
The hand warmer MUST be fully charged before using it for the first time.
1. Insert the provided charging cable into your hand warmer and connect it to a suitable charging device or certified power supply.2. Blue indicator lights will blink to show the power level
While charging:
# 3 blue lights indicate a full charge
# 1 blue light indicates a low charge
3. Disconnect cable when charging is completed.# Avoid using a USB charger higher than 5 volts.
# Avoid using the heat function while charging.
USING THE HAND WARMER FEATURE
Turn on
In OFF mode, hold the Power Button for 5 seconds to turn on the warmer. The hand warmer will power on in the LOW temperature setting.
Change heating level
- Each press of the Power Button will increase the temperature setting by one level.
- Press the Power Button once after the HIGH heat setting to return to the LOW setting. Repeatedly press it to cycle to the desired setting.
Check the remaining battery
When the hand warmer is off, double-press the Power Button to show the remaining battery of the Hand Warmer.
- 3 blue lights indicates battery full.
- 1 blue light indicates battery low charge.
Turn off
Long press the Power Button until all indicator lights turn off in heating mode.
Temperature and Operating Time:
Setting |
LED Indicators |
Max warming temp |
Operating time |
Low |
1 Red LED |
95-107°F |
Approx. 7 hours |
Medium |
2 Red LEDS |
104-118°F |
Approx. 5 hours |
High |
3 Red LEDS |
118-131°F |
Approx. 3 hours |
* All data based on tests conducted at 77°F / 25°C.
Operating time will change depending on surrounding temperature.
CHARGING AN EXTERNAL DEVICE
- Turn off the hand warming function.
- Connect the USB C convertor to the Hand Warmer.
- Connect the USB plug of the appropriate mobile device charging cable into the USB port of the hand warmer.
- The mobile device should begin to charge automatically. The BLUE Hand Warmer lights will illuminate indicating power status.
NOTE: While charging a mobile device, the heat functions are disabled to prevent overheating. Unplug the device to allow the heat function to resume.
TROUBLESHOOTING
Problem |
Possible Cause |
Treatment |
Not heating |
Low capacity |
Charge |
Power Button doesn't respond |
Unit is charging |
Stop charge or wait till charge is complete (All lights on) |
Power Button is broken |
Contact our support team |
|
Hand Warmer's usage time is shorter |
Unit not fully charged |
Charge till full |
Reached batteries' lifespan. Batteries' capacity reduces slightly with each charge |
Contact our support team |
|
Low ambient temperature |
Wrap the Hand Warmer with a cloth to slow down heat dissipation |
|
Long charging time |
External temperature too high or too low |
Charge where ambient temperature is between 32°F~104°F |
Not using the standard charger |
Use recommended charger |
|
Cannot charge (Lights do not blink) |
USB cable not inserted firmly |
Check both ends for secure connection |
Not standard charger |
Use recommended charger |
|
Charging cable is broken |
Try a different cable |
|
The connector is broken |
Contact our support team |
|
Mobile device does not charge |
Unstable connection |
Try another cable |
Using the wrong USB port |
Connect to the USB output port instead of input port |
GENERAL SAFETY WARNINGS
Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, toxic fumes, fire or explosion,for which damages you(“Purchaser”),and not Anbooc Manufacturing Company(collectively Anbooc) are responsible.
- Do not expose battery to intense heat or dispose in a fire or other excessively hot environment as this may result in an explosion.
- Do not expose to intense sunlight or temperature above 113 ℉(45℃).
- Do not expose to moisture or submerge in liquid.
- Not intended for children.
- Once the product leaks, do not let the leakage touchyour skin, eyes and other sensitive parts; if you already touch it, please wash the touching area with plenty of waterfirst, then go to the hospital asap.
- Be cautious of excessive drops, bumps, abrasions, or other impacts to this Hand Warmer. If there is any damage to the Hand Warmer such as dents, punctures, tears, deformities or corrosion, due to any case, discontinue use and dispose of it properly as outlined in the Safe Battery Disposal section in this manual.
- Do not disassemble this Hand Warmer or attempt to repair or modify it in any manner.
- Do not attempt to charge Hand Warmer using any method, apparatus or connection other than included charging cable to avoid the potential for overheating, leaking, or explosion.
- If the Hand Warmer is excessively hot, is emitting odor, becomes deformed, damaged, or demonstrates abnormal operation, immediately discontinue use and contact Anbooc.
- Fully charge your Hand Warmer prior to any extended storage.
- All batteries lose energy from self-discharge over time, especially at higher temperatures. When the Hand Warmer is not in use, we recommend that the battery is charged at least every three(3) months.
CLEANING
Wipe the product with a soft and clean cloth. Do not use wet or damp cloth as it may cause malfunction. Do not use alcohol, thinner, gasoline or cleanser.
MAINTENANCE
How to prolong battery life
To prolong lithium-ion batteries, keep it charged at all times.
Avoid fully depleting the battery or leaving the battery in a fully discharged state.
If you only use the Anbooc in the winter season, be sure to put a reminder on your calendar
to charge the Anbooc every month or two to maintain the battery’s health and ensure it is
ready to go when cold temperatures return.
How to prolong heating time
Factors that affect heating time include the surrounding temperature, humidity, insulation, your hands’ temperature, etc. Heat will escape from the unit faster when in direct contact with the
cold, thus forcing it to work harder. Hence, it is best to keep the unit insulated in your pocket,
gloves or scarf.
If the unit loses heat due to cold hands, keep holding the unit and it will start to feel warm once the amount of heat produced is more than the amount absorbed by your hands.
TAKE ON THE PLANE
The hand warmers can be carried on a plane in the specified capacity. For specific requirements, please consult the airline of the plane you are flying with.
WARRANTY
We promise an unconditional refund or replacement if this product is found to be faulty as a result of faulty materials or workmanship within one year of date of purchase.
This guarantee is subject to the following terms:
- Anbooc brand must be notified of the fault.
- Proof of purchase must be presented to Anbooc’s customer support team.
What is NOT COVERED:
- Incidental or consequential damage caused by possible defects with this product.
- Damage to product caused by improper power supply voltage, accident, fire, floods or acts of nature.
- Failure of product resulting from unauthorized modifications to the product.
- Improper installation or failure to perform the necessary maintenance.
Customer support team: support@Anbooc.com
Business queries: business@Anbooc.com
Extend Your Warranty
Visit our website: www.anbooc.com and subscribe to become an Anbooc member, and receive our extended customer care service. Members also have the opportunity to test our new products.